Circuit Splash

Use this Resistor Color Code Calculator to quickly determine resistor values based on color bands. Supports 4-band, 5-band, and 6-band resistors with tolerance.

This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This allows them to stand well with repeated inserts into the solderless panels.

The circuit is really simple. All you need is an Arduino, the resistor you want to measure, and another resistor with a known value

This is done by connecting the OUTPUT of each timer to the TRIGGER of the other through a diode and placing a resistor in the trigger circuit. The resistor limits the current from the opposite timers output when the trigger is closed on the stopped timer.

A potential divider circuit is a very common circuit used in electronics where an input voltage has to be converted to another voltage less than it. This circuit is very useful for all analog circuits where variable voltages are required, hence it is important to understand how this circuit works and how to calculate the values of Resistors.

This project covers a simple fire alarm circuit using a thermistor and a 555 timer IC. Here, a thermistor is used as a fire detector. A thermistor is a temperature-sensitive resistor whose resistance changes with temperature: it decreases as temperature increases and vice versa.

Blue - negative, ground Red - positive, Vcc Brown - 74163 pin 11 (Output A) Green - 74163 pin 12 (Output B) Magenta - 74163 pin 13 (Output C) Gray - inverter output

Type C Female Connector is used widely for phone accessory, PCB Socket. And More electronic projects you can do school and collage projects with the help of Type C cable open type in yellow color.

The Hex Calculator is used to perform addition, subtraction, multiplication and division on two hexadecimal numbers.